 |
CUT PIECES (CP)
Magnetic Strip cut completely through the thickness of the magnet and any laminates into individual pieces |
 |
CLEAN SCORE (CS)
Magnetic Strip with adhesive is available on rolls cut to a specified length through the thickness of the magnet, adhesive and adhesive’s carrier, but not through the adhesive’s protective release paper. This process allows you to easily remove the magnetic piece from the release paper for immediate application. |
 |
PARTIAL SCORE (PS)
Plain Magnetic Strip is available on rolls scored to a specified length but not cut all the way through the thickness of the magnet. The strip can be broken into pieces by bending at the score. |
 |
SCORED THROUGH THE LAMINATE (STL)
Magnetic Strip with laminate is available on rolls with a specified length scored through the laminate (full or partial) and partially through the thickness of the magnet. This process provides a pre-measured magnetic piece with the laminate intact, that can be easily broken off the roll by bending at the score. |
